Many men have thought of an increase in the penis, but the methods with which they are familiar are somehow frightened.In medicine, there is a tool like an emptiness.
It is used for operations on the male genitals to maintain the size of the penis.
How the pump acts
The operating principle is quite simple.With the help of an emptiness around the penis, weak pressure occurs, causing the stimulation of blood circulation.For this reason, the cavernous tissues are filled with blood, due to which a rapid and hardened increase in the penis occurs.A similar phenomenon in medicine is called hyperemia.
During an erection, the penis fabric is poured with blood, from this they swell strongly.The void pump stimulates ships and allows you to maintain a member size from 30 to 60 minutes.In addition, this device can be used instead of a massage.
The pressure in the ball expands the cavernous bodies, significantly increasing the blood flow and penis size.The member after the pump seems much more spectacular than with ordinary excitement.
Do not abuse the vacuum pump during use.The genitals will no longer become from this than it should, but they could occur bleeding, bruises and other complications!
Variety
All vacuum pumps have a similar design, not taking into account their principle of action.The ship where the male organ is located is a plastic ball with divisions.Together with her, in the set there is an nozzle of the seal and a pear, which pumps the pressure inside the ball.
There are devices with additional devices: pressure adjustment buttons, tampering, restoration valves.
In the manual air it is pumped and removed with a pear or a piston.Their application is good as they are available for every man who wants to increase their genitals.
In automatic void, it is created using an electric pump that works on batteries.The pressure can be monitored on a mounted pressure gauge and some samples are equipped with a button for the absorption force.
Water devices are a more modern option for an increase in male penis.Their principle of action is based on the fact that instead of the air, the ball is pumped with water with a pump.Hydraulic foam has greater efficiency and its life is longer.
How to choose a pump?
The device is selected according to two criteria: in terms of genitals and a specific activity.
- The length of the ship should be at least 2-3 cm larger than the penis in an excited state;
- The diameter of the ball must be selected 1-2 cm larger than the male member diameter during an erection;
- For those who do it for the first time, experts recommend using the manual pomp, in which air pumping is performed with a pear.
It is better to buy an apparatus with a transparent ball to monitor the process and also pay attention to the strength of the material from which it is made.
Pros and cons
An empty pump for men cannot only increase the size of the penis, but also have a therapeutic effect.If you constantly use it, the volume of the male genitals increases over time and during sexual intercourse, the erection remains much longer.This is due to a decrease in the sensitivity of the organ.
In addition, male dignity increases not only in length, but also in width.
In addition, under the influence of a void, it is possible to adjust the shape of a male organ, especially if it has a curvature.Inside the pump, the penis is kept evenly by the edges of the walls, in this way it is straightened.
The consequences of improper use:
- Due to the violation of the capillaries, peculiar points are presented on the skin of the penis;
- reduction of ejaculation or erection;
- numbness.
Efficiency when using
With constant use, after six months the shape and size of the penis will remain unchanged.The result will be much more effective if you take drugs that increase the release of male hormones during this period.
The member after the pump became up to 3 cm more, for a period from 6 months to one year.The thickness of dignity has increased to 2 cm.
Instructions for use
If the void pump is used for the first time, the process should not last more than 5 minutes to avoid unpleasant consequences.Wrong use can lead to disorders of some functions, as well as edema.
To prevent this from happening, it is necessary to follow the following recommendations
- First of all, the air must be pumped by the device, this will improve the circulation of blood flow in the penis.Previously, it is necessary to take care of the penis lubrication.
- An increase in the penis should not last more than 20 minutes.
- To reduce the pressure inside the ship, it is necessary to start air.To do this, just press on a special valve positioned near a pear.In some models, for these purposes there is a small hole that is covered with a finger during the procedure.
- After the member has reached maximum hardness, it is necessary to put on a ring on its base, which provides an invaded organ and keeps it in a state of erection.
- If a pump with a hydraulic pump, before the procedure you need to take a relaxing bath with hot water.After that, after 8 minutes, male dignity must be placed in an emptiness ship.The ring should adapt firmly to the scrotum, thus lowering the pressure in this area.The device is placed in such a way that the distance from the penis to the walls of the ball is the same from all sides.It is important to do it before the start of the suction moment.By observing these instructions, it is possible to avoid lesions.
- To form an empty environment, experts advise to make different oscillating movements.Then excess water is lowered using a trigger.Sometimes the pump must be pressed several times so that excess fluid leaves.
- After the descent of the water, you can rest a little, then proceed with the procedure.If the pressure decreases, it must be pumped to the required level.
The male advantage can be increased using a series of special exercises, but for this reason it is necessary to follow all the recommendations for the use of the device.
Throughout the first week, the procedure is performed 10 minutes once a day.
In the second week, 15, for the third 10 minutes twice a day.
The fourth - twice a day for 15, the fifth - 20 minutes in the morning and 10 in the evening.
Possible consequences
With improper use of the device, injuries often occur.
- Due to the stagnation of the sap, a swollen ring appears around the penis head.Sometimes this problem can also occur with correct use.In such cases, it is better to stop the procedure for a while.
- As a result of prolonged or low pressure manipulations in the pot, a huge flow of sap occurs, forming swelling.
- The deterioration of an erection is the most common consequence.
- With a strong load, a change in the color of the skin can occur.Due to the serious discharge, bleeding often occurs, which can be irreversible.
- Blocks of blood vessels are the rarer, but dangerous problem, so it is better to postpone the company to increase the penis.
Contraindications
The duration of the void environment is determined by cellular expansion.Without prejudice to all the recommendations for the use of the device, an impulse effect is created within the ship.With its increase, a negative pressure occurs, which causes numbness and a person does not feel pain.
The maximum vacuum volume should not cause pain, but a single effect no more than 18 seconds.The duration of the manipulations of the void per day must not exceed 45 minutes.
The member's male penis has the following contraindications:
- diabetes mellitus;
- sexual transmission diseases;
- Inflammation of the urethra;
- deterioration of the functions of the excretory organs of the digestive system;
- cardiovascular pathologies;
- The risk of blood clots.
Operation of the device
In order for the device to maintain suitability as long as possible, it needs special care.Since manipulations are performed in an intimate place that requires careful compliance with the rules of personal hygiene, the pump must be treated with antibacterial solutions.
Before use, it is recommended to wash the vacuum pump with hot water and soap and treat all its components with antiseptics.After the procedure, this invention is again sterilized, canceled and preserved in a clean and dry place.
How to do it alone?
The device can be useful not only to increase the size of the genital organ of a man or healing therapy.
The pump can be made with improvised means that are stored in the garage or pantry.
From the cuff pump
Before starting to produce, it is necessary to prepare all the spare parts and the tools that can be useful for use.An empty pump is generally made in a car or bicycle headset pump.This is the simplest and most reliable method.
First you have to create the opposite effect of the pump so that it does not provide air, but on the contrary, pulling it out.To make such an effect, you need to relax the pump, rotating the bracelet with the rear side, then assemble the device.This will create an empty environment.
Then, mount the re -lunch valve for the descent of excess air.The aquarium compressor valve is suitable for this.It is mounted in the pump tube to avoid the penetration of the air into the pump.For a greater effect, it is recommended to carry out the seal.
This method is the simplest and is designed to create a surface emptiness environment.The performance is up to 80% of air pumping.If you need to make a more powerful pump, you can use a domestic compressor.
Using a medical syringe
We make an empty pump from a normal medical syringe.For this, the following materials will be necessary:
- plastic shirt;
- a plastic tube, which should coincide with the diameter of the holes of the T -shirt and the syringe;
- two valves from the compressor of the aquarium;
- The syringe (the power of the future device depends on its size).
From the plastic tube, it is necessary to cut three 10 cm pieces, then attach them to the shirt.The joints should be hermetic and well fixed so as not to jump out when the pressure occurs.You need to get the shirt with three bouncers.
One of these, which is located in the center, is attached to the nose of the syringe.On the remaining two ends, it is necessary to install the valves and one should open the other towards the inside.In order not to confuse, the arrows are generally positioned on aquarium valves that indicate the direction of the movement of the air.
This device made with a syringe can pump one liquid from one container to another.
To perform the procedure, a withdrawal with a valve is lowered in the liquid and the second in an empty ship, which must be filled.The pump is guided using a piston.